stm32f4xx_hal_i2s_ex.c

Go to the documentation of this file.

 
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
 
#ifdef HAL_I2S_MODULE_ENABLED
 
#if defined (SPI_I2S_FULLDUPLEX_SUPPORT)
 
/* Private typedef -----------------------------------------------------------*/
typedef enum
{
  I2S_USE_I2S      = 0x00U,   
  I2S_USE_I2SEXT   = 0x01U,   
} I2S_UseTypeDef;
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
static void I2SEx_TxRxDMAHalfCplt(DMA_HandleTypeDef *hdma);
static void I2SEx_TxRxDMACplt(DMA_HandleTypeDef *hdma);
static void I2SEx_TxRxDMAError(DMA_HandleTypeDef *hdma);
static void I2SEx_RxISR_I2S(I2S_HandleTypeDef *hi2s);
static void I2SEx_RxISR_I2SExt(I2S_HandleTypeDef *hi2s);
static void I2SEx_TxISR_I2S(I2S_HandleTypeDef *hi2s);
static void I2SEx_TxISR_I2SExt(I2S_HandleTypeDef *hi2s);
static HAL_StatusTypeDef I2SEx_FullDuplexWaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s,
                                                                   uint32_t Flag,
                                                                   uint32_t State,
                                                                   uint32_t Timeout,
                                                                   I2S_UseTypeDef i2sUsed);
/* Private functions ---------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
 
HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s,
                                            uint16_t *pTxData,
                                            uint16_t *pRxData,
                                            uint16_t Size,
                                            uint32_t Timeout)
{
  uint32_t tmp1 = 0U;
 
  if (hi2s->State != HAL_I2S_STATE_READY)
  {
    return HAL_BUSY;
  }
 
  if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
  {
    return HAL_ERROR;
  }
 
  /* Process Locked */
  __HAL_LOCK(hi2s);
 
  tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
  /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
     is selected during the I2S configuration phase, the Size parameter means the number
     of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
     frame is selected the Size parameter means the number of 16-bit data length. */
  if ((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
  {
    hi2s->TxXferSize  = (Size << 1U);
    hi2s->TxXferCount = (Size << 1U);
    hi2s->RxXferSize  = (Size << 1U);
    hi2s->RxXferCount = (Size << 1U);
  }
  else
  {
    hi2s->TxXferSize  = Size;
    hi2s->TxXferCount = Size;
    hi2s->RxXferSize  = Size;
    hi2s->RxXferCount = Size;
  }
 
  /* Set state and reset error code */
  hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
  hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
 
  tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
  /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
  if ((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX))
  {
    /* Prepare the First Data before enabling the I2S */
    hi2s->Instance->DR = (*pTxData++);
    hi2s->TxXferCount--;
 
    /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
    __HAL_I2SEXT_ENABLE(hi2s);
 
    /* Enable I2Sx peripheral */
    __HAL_I2S_ENABLE(hi2s);
 
    /* Check if Master Receiver mode is selected */
    if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_TX)
    {
      /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
      access to the SPI_SR register. */
      __HAL_I2SEXT_CLEAR_OVRFLAG(hi2s);
    }
 
    while ((hi2s->RxXferCount > 0U) || (hi2s->TxXferCount > 0U))
    {
      if (hi2s->TxXferCount > 0U)
      {
        /* Wait until TXE flag is set */
        if (I2SEx_FullDuplexWaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout, I2S_USE_I2S) != HAL_OK)
        {
          /* Set the error code */
          SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT);
          hi2s->State = HAL_I2S_STATE_READY;
 
          /* Process UnLock */
          __HAL_UNLOCK(hi2s);
          return HAL_ERROR;
        }
        /* Write Data on DR register */
        hi2s->Instance->DR = (*pTxData++);
        hi2s->TxXferCount--;
 
        /* Check if an underrun occurs */
        if ((__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) && (tmp1 == I2S_MODE_SLAVE_TX))
        {
          /* Clear Underrun flag */
          __HAL_I2S_CLEAR_UDRFLAG(hi2s);
 
          /* Set the error code */
          SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR);
        }
      }
      if (hi2s->RxXferCount > 0U)
      {
        /* Wait until RXNE flag is set */
        if (I2SEx_FullDuplexWaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout, I2S_USE_I2SEXT) != HAL_OK)
        {
          /* Set the error code */
          SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT);
          hi2s->State = HAL_I2S_STATE_READY;
 
          /* Process UnLock */
          __HAL_UNLOCK(hi2s);
          return HAL_ERROR;
        }
        /* Read Data from DR register */
        (*pRxData++) = I2SxEXT(hi2s->Instance)->DR;
        hi2s->RxXferCount--;
 
        /* Check if an overrun occurs */
        if (__HAL_I2SEXT_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET)
        {
          /* Clear Overrun flag */
          __HAL_I2S_CLEAR_OVRFLAG(hi2s);
 
          /* Set the error code */
          SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR);
        }
      }
    }
  }
  /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
  else
  {
    /* Prepare the First Data before enabling the I2S */
    I2SxEXT(hi2s->Instance)->DR = (*pTxData++);
    hi2s->TxXferCount--;
 
    /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
    __HAL_I2SEXT_ENABLE(hi2s);
 
    /* Enable I2S peripheral before the I2Sext*/
    __HAL_I2S_ENABLE(hi2s);
 
    /* Check if Master Receiver mode is selected */
    if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
    {
      /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
      access to the SPI_SR register. */
      __HAL_I2S_CLEAR_OVRFLAG(hi2s);
    }
 
    while ((hi2s->RxXferCount > 0U) || (hi2s->TxXferCount > 0U))
    {
      if (hi2s->TxXferCount > 0U)
      {
        /* Wait until TXE flag is set */
        if (I2SEx_FullDuplexWaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout, I2S_USE_I2SEXT) != HAL_OK)
        {
          /* Set the error code */
          SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT);
          hi2s->State = HAL_I2S_STATE_READY;
 
          /* Process UnLock */
          __HAL_UNLOCK(hi2s);
          return HAL_ERROR;
        }
        /* Write Data on DR register */
        I2SxEXT(hi2s->Instance)->DR = (*pTxData++);
        hi2s->TxXferCount--;
 
        /* Check if an underrun occurs */
        if ((__HAL_I2SEXT_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) && (tmp1 == I2S_MODE_SLAVE_RX))
        {
          /* Clear Underrun flag */
          __HAL_I2S_CLEAR_UDRFLAG(hi2s);
 
          /* Set the error code */
          SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR);
        }
      }
      if (hi2s->RxXferCount > 0U)
      {
        /* Wait until RXNE flag is set */
        if (I2SEx_FullDuplexWaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout, I2S_USE_I2S) != HAL_OK)
        {
          /* Set the error code */
          SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT);
          hi2s->State = HAL_I2S_STATE_READY;
 
          /* Process UnLock */
          __HAL_UNLOCK(hi2s);
          return HAL_ERROR;
        }
        /* Read Data from DR register */
        (*pRxData++) = hi2s->Instance->DR;
        hi2s->RxXferCount--;
 
        /* Check if an overrun occurs */
        if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET)
        {
          /* Clear Overrun flag */
          __HAL_I2S_CLEAR_OVRFLAG(hi2s);
 
          /* Set the error code */
          SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR);
        }
      }
    }
  }
 
  hi2s->State = HAL_I2S_STATE_READY;
  __HAL_UNLOCK(hi2s);
 
  if (hi2s->ErrorCode != HAL_I2S_ERROR_NONE)
  {
    return HAL_ERROR;
  }
  else
  {
    return HAL_OK;
  }
}
 
HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s,
                                               uint16_t *pTxData,
                                               uint16_t *pRxData,
                                               uint16_t Size)
{
  uint32_t tmp1 = 0U;
 
  if (hi2s->State != HAL_I2S_STATE_READY)
  {
    return HAL_BUSY;
  }
 
  if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
  {
    return  HAL_ERROR;
  }
 
  /* Process Locked */
  __HAL_LOCK(hi2s);
 
  hi2s->pTxBuffPtr = pTxData;
  hi2s->pRxBuffPtr = pRxData;
 
  tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
  /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
  is selected during the I2S configuration phase, the Size parameter means the number
  of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
  frame is selected the Size parameter means the number of 16-bit data length. */
  if ((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
  {
    hi2s->TxXferSize  = (Size << 1U);
    hi2s->TxXferCount = (Size << 1U);
    hi2s->RxXferSize  = (Size << 1U);
    hi2s->RxXferCount = (Size << 1U);
  }
  else
  {
    hi2s->TxXferSize  = Size;
    hi2s->TxXferCount = Size;
    hi2s->RxXferSize  = Size;
    hi2s->RxXferCount = Size;
  }
 
  hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
  hi2s->State     = HAL_I2S_STATE_BUSY_TX_RX;
 
  /* Set the function for IT treatment */
  if ((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX))
  {
    /* Enable I2Sext RXNE and ERR interrupts */
    __HAL_I2SEXT_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
 
    /* Enable I2Sx TXE and ERR interrupts */
    __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
 
    /* Transmit First data */
    hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
    hi2s->TxXferCount--;
 
    if (hi2s->TxXferCount == 0U)
    {
      /* Disable TXE and ERR interrupt */
      __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
    }
  }
  else  /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
  {
    /* Enable I2Sext TXE and ERR interrupts */
    __HAL_I2SEXT_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
 
    /* Enable I2Sext RXNE and ERR interrupts */
    __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
 
    /* Transmit First data */
    I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++);
    hi2s->TxXferCount--;
 
    if (hi2s->TxXferCount == 0U)
    {
      /* Disable I2Sext TXE and ERR interrupt */
      __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
    }
  }
 
  __HAL_UNLOCK(hi2s);
  /* Enable I2Sext peripheral */
  __HAL_I2SEXT_ENABLE(hi2s);
 
  /* Enable I2S peripheral */
  __HAL_I2S_ENABLE(hi2s);
 
  return HAL_OK;
}
 
HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s,
                                                uint16_t *pTxData,
                                                uint16_t *pRxData,
                                                uint16_t Size)
{
  uint32_t *tmp = NULL;
  uint32_t tmp1 = 0U;
 
  if (hi2s->State != HAL_I2S_STATE_READY)
  {
    return HAL_BUSY;
  }
 
  if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
  {
    return  HAL_ERROR;
  }
 
  /* Process Locked */
  __HAL_LOCK(hi2s);
 
  hi2s->pTxBuffPtr = pTxData;
  hi2s->pRxBuffPtr = pRxData;
 
  tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
  /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
  is selected during the I2S configuration phase, the Size parameter means the number
  of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
  frame is selected the Size parameter means the number of 16-bit data length. */
  if ((tmp1 == I2S_DATAFORMAT_24B) || (tmp1 == I2S_DATAFORMAT_32B))
  {
    hi2s->TxXferSize  = (Size << 1U);
    hi2s->TxXferCount = (Size << 1U);
    hi2s->RxXferSize  = (Size << 1U);
    hi2s->RxXferCount = (Size << 1U);
  }
  else
  {
    hi2s->TxXferSize  = Size;
    hi2s->TxXferCount = Size;
    hi2s->RxXferSize  = Size;
    hi2s->RxXferCount = Size;
  }
 
  hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
  hi2s->State     = HAL_I2S_STATE_BUSY_TX_RX;
 
  /* Set the I2S Rx DMA Half transfer complete callback */
  hi2s->hdmarx->XferHalfCpltCallback = I2SEx_TxRxDMAHalfCplt;
 
  /* Set the I2S Rx DMA transfer complete callback */
  hi2s->hdmarx->XferCpltCallback  = I2SEx_TxRxDMACplt;
 
  /* Set the I2S Rx DMA error callback */
  hi2s->hdmarx->XferErrorCallback = I2SEx_TxRxDMAError;
 
  /* Set the I2S Tx DMA Half transfer complete callback as NULL */
  hi2s->hdmatx->XferHalfCpltCallback  = NULL;
 
  /* Set the I2S Tx DMA transfer complete callback as NULL */
  hi2s->hdmatx->XferCpltCallback  = NULL;
 
  /* Set the I2S Tx DMA error callback */
  hi2s->hdmatx->XferErrorCallback = I2SEx_TxRxDMAError;
 
  tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
  /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
  if ((tmp1 == I2S_MODE_MASTER_TX) || (tmp1 == I2S_MODE_SLAVE_TX))
  {
    /* Enable the Rx DMA Stream */
    tmp = (uint32_t *)&pRxData;
    HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, *(uint32_t *)tmp, hi2s->RxXferSize);
 
    /* Enable Rx DMA Request */
    SET_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_RXDMAEN);
 
    /* Enable the Tx DMA Stream */
    tmp = (uint32_t *)&pTxData;
    HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t *)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize);
 
    /* Enable Tx DMA Request */
    SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN);
  }
  else
  {
    /* Check if Master Receiver mode is selected */
    if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
    {
      /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
      access to the SPI_SR register. */
      __HAL_I2S_CLEAR_OVRFLAG(hi2s);
    }
    /* Enable the Tx DMA Stream */
    tmp = (uint32_t *)&pTxData;
    HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t *)tmp, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, hi2s->TxXferSize);
 
    /* Enable Tx DMA Request */
    SET_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_TXDMAEN);
 
    /* Enable the Rx DMA Stream */
    tmp = (uint32_t *)&pRxData;
    HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t *)tmp, hi2s->RxXferSize);
 
    /* Enable Rx DMA Request */
    SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN);
  }
 
  __HAL_UNLOCK(hi2s);
  /* Check if the I2S is already enabled */
  if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
  {
    /* Enable I2Sext(transmitter) before enabling I2Sx peripheral */
    __HAL_I2SEXT_ENABLE(hi2s);
    /* Enable I2S peripheral before the I2Sext */
    __HAL_I2S_ENABLE(hi2s);
  }
 
  return HAL_OK;
}
 
void HAL_I2SEx_FullDuplex_IRQHandler(I2S_HandleTypeDef *hi2s)
{
  __IO uint32_t i2ssr     = hi2s->Instance->SR;
  __IO uint32_t i2sextsr  = I2SxEXT(hi2s->Instance)->SR;
  __IO uint32_t i2scr2    = hi2s->Instance->CR2;
  __IO uint32_t i2sextcr2 = I2SxEXT(hi2s->Instance)->CR2;
 
  /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
  if ((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX))
  {
    /* I2S in mode Transmitter -------------------------------------------------*/
    if (((i2ssr & I2S_FLAG_TXE) == I2S_FLAG_TXE) && ((i2scr2 & I2S_IT_TXE) != RESET))
    {
      /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX,
      the I2S TXE interrupt will be generated to manage the full-duplex transmit phase. */
      I2SEx_TxISR_I2S(hi2s);
    }
 
    /* I2Sext in mode Receiver -----------------------------------------------*/
    if (((i2sextsr & I2S_FLAG_RXNE) == I2S_FLAG_RXNE) && ((i2sextcr2 & I2S_IT_RXNE) != RESET))
    {
      /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX,
      the I2Sext RXNE interrupt will be generated to manage the full-duplex receive phase. */
      I2SEx_RxISR_I2SExt(hi2s);
    }
 
    /* I2Sext Overrun error interrupt occurred --------------------------------*/
    if (((i2sextsr & I2S_FLAG_OVR) == I2S_FLAG_OVR) && ((i2sextcr2 & I2S_IT_ERR) != RESET))
    {
      /* Disable RXNE and ERR interrupt */
      __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
 
      /* Disable TXE and ERR interrupt */
      __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
 
      /* Clear Overrun flag */
      __HAL_I2S_CLEAR_OVRFLAG(hi2s);
 
      /* Set the I2S State ready */
      hi2s->State = HAL_I2S_STATE_READY;
 
      /* Set the error code and execute error callback*/
      SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR);
      /* Call user error callback */
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
      hi2s->ErrorCallback(hi2s);
#else
      HAL_I2S_ErrorCallback(hi2s);
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
    }
 
    /* I2S Underrun error interrupt occurred ----------------------------------*/
    if (((i2ssr & I2S_FLAG_UDR) == I2S_FLAG_UDR) && ((i2scr2 & I2S_IT_ERR) != RESET))
    {
      /* Disable TXE and ERR interrupt */
      __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
 
      /* Disable RXNE and ERR interrupt */
      __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
 
      /* Clear underrun flag */
      __HAL_I2S_CLEAR_UDRFLAG(hi2s);
 
      /* Set the I2S State ready */
      hi2s->State = HAL_I2S_STATE_READY;
 
      /* Set the error code and execute error callback*/
      SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR);
      /* Call user error callback */
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
      hi2s->ErrorCallback(hi2s);
#else
      HAL_I2S_ErrorCallback(hi2s);
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
    }
  }
  /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
  else
  {
    /* I2Sext in mode Transmitter ----------------------------------------------*/
    if (((i2sextsr & I2S_FLAG_TXE) == I2S_FLAG_TXE) && ((i2sextcr2 & I2S_IT_TXE) != RESET))
    {
      /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX,
      the I2Sext TXE interrupt will be generated to manage the full-duplex transmit phase. */
      I2SEx_TxISR_I2SExt(hi2s);
    }
 
    /* I2S in mode Receiver --------------------------------------------------*/
    if (((i2ssr & I2S_FLAG_RXNE) == I2S_FLAG_RXNE) && ((i2scr2 & I2S_IT_RXNE) != RESET))
    {
      /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX,
      the I2S RXNE interrupt will be generated to manage the full-duplex receive phase. */
      I2SEx_RxISR_I2S(hi2s);
    }
 
    /* I2S Overrun error interrupt occurred -------------------------------------*/
    if (((i2ssr & I2S_FLAG_OVR) == I2S_FLAG_OVR) && ((i2scr2 & I2S_IT_ERR) != RESET))
    {
      /* Disable RXNE and ERR interrupt */
      __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
 
      /* Disable TXE and ERR interrupt */
      __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
 
      /* Set the I2S State ready */
      hi2s->State = HAL_I2S_STATE_READY;
 
      /* Set the error code and execute error callback*/
      SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR);
      /* Call user error callback */
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
      hi2s->ErrorCallback(hi2s);
#else
      HAL_I2S_ErrorCallback(hi2s);
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
    }
 
    /* I2Sext Underrun error interrupt occurred -------------------------------*/
    if (((i2sextsr & I2S_FLAG_UDR) == I2S_FLAG_UDR) && ((i2sextcr2 & I2S_IT_ERR) != RESET))
    {
      /* Disable TXE and ERR interrupt */
      __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
 
      /* Disable RXNE and ERR interrupt */
      __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
 
      /* Set the I2S State ready */
      hi2s->State = HAL_I2S_STATE_READY;
 
      /* Set the error code and execute error callback*/
      SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR);
      /* Call user error callback */
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
      hi2s->ErrorCallback(hi2s);
#else
      HAL_I2S_ErrorCallback(hi2s);
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
    }
  }
}
 
__weak void HAL_I2SEx_TxRxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hi2s);
 
  /* NOTE : This function Should not be modified, when the callback is needed,
            the HAL_I2SEx_TxRxHalfCpltCallback could be implemented in the user file
   */
}
 
__weak void HAL_I2SEx_TxRxCpltCallback(I2S_HandleTypeDef *hi2s)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hi2s);
 
  /* NOTE : This function should not be modified, when the callback is needed,
            the HAL_I2SEx_TxRxCpltCallback could be implemented in the user file
   */
}
 
static void I2SEx_TxRxDMAHalfCplt(DMA_HandleTypeDef *hdma)
{
  I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
 
  /* Call user TxRx Half complete callback */
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
  hi2s->TxRxHalfCpltCallback(hi2s);
#else
  HAL_I2SEx_TxRxHalfCpltCallback(hi2s);
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
}
 
static void I2SEx_TxRxDMACplt(DMA_HandleTypeDef *hdma)
{
  I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
 
  /* If DMA is configured in DMA_NORMAL mode */
  if (hdma->Init.Mode == DMA_NORMAL)
  {
    if (((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_TX) || \
        ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX))
    /* Disable Tx & Rx DMA Requests */
    {
      CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_RXDMAEN);
      CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN);
    }
    else
    {
      CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN);
      CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, SPI_CR2_TXDMAEN);
    }
 
    hi2s->RxXferCount = 0U;
    hi2s->TxXferCount = 0U;
 
    hi2s->State = HAL_I2S_STATE_READY;
  }
 
  /* Call user TxRx complete callback */
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
  hi2s->TxRxCpltCallback(hi2s);
#else
  HAL_I2SEx_TxRxCpltCallback(hi2s);
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
}
 
static void I2SEx_TxRxDMAError(DMA_HandleTypeDef *hdma)
{
  I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
 
  /* Disable Rx and Tx DMA Request */
  CLEAR_BIT(hi2s->Instance->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN));
  CLEAR_BIT(I2SxEXT(hi2s->Instance)->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN));
 
  hi2s->TxXferCount = 0U;
  hi2s->RxXferCount = 0U;
 
  hi2s->State = HAL_I2S_STATE_READY;
 
  /* Set the error code and execute error callback*/
  SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA);
  /* Call user error callback */
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
  hi2s->ErrorCallback(hi2s);
#else
  HAL_I2S_ErrorCallback(hi2s);
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
}
 
static void I2SEx_TxISR_I2S(I2S_HandleTypeDef *hi2s)
{
  /* Write Data on DR register */
  hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
  hi2s->TxXferCount--;
 
  if (hi2s->TxXferCount == 0U)
  {
    /* Disable TXE and ERR interrupt */
    __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
 
    if (hi2s->RxXferCount == 0U)
    {
      hi2s->State = HAL_I2S_STATE_READY;
      /* Call user TxRx complete callback */
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
      hi2s->TxRxCpltCallback(hi2s);
#else
      HAL_I2SEx_TxRxCpltCallback(hi2s);
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
    }
  }
}
 
static void I2SEx_TxISR_I2SExt(I2S_HandleTypeDef *hi2s)
{
  /* Write Data on DR register */
  I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++);
  hi2s->TxXferCount--;
 
  if (hi2s->TxXferCount == 0U)
  {
    /* Disable I2Sext TXE and ERR interrupt */
    __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
 
    if (hi2s->RxXferCount == 0U)
    {
      hi2s->State = HAL_I2S_STATE_READY;
      /* Call user TxRx complete callback */
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
      hi2s->TxRxCpltCallback(hi2s);
#else
      HAL_I2SEx_TxRxCpltCallback(hi2s);
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
    }
  }
}
 
static void I2SEx_RxISR_I2S(I2S_HandleTypeDef *hi2s)
{
  /* Read Data from DR register */
  (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
  hi2s->RxXferCount--;
 
  if (hi2s->RxXferCount == 0U)
  {
    /* Disable RXNE and ERR interrupt */
    __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
 
    if (hi2s->TxXferCount == 0U)
    {
      hi2s->State = HAL_I2S_STATE_READY;
      /* Call user TxRx complete callback */
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
      hi2s->TxRxCpltCallback(hi2s);
#else
      HAL_I2SEx_TxRxCpltCallback(hi2s);
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
    }
  }
}
 
static void I2SEx_RxISR_I2SExt(I2S_HandleTypeDef *hi2s)
{
  /* Read Data from DR register */
  (*hi2s->pRxBuffPtr++) = I2SxEXT(hi2s->Instance)->DR;
  hi2s->RxXferCount--;
 
  if (hi2s->RxXferCount == 0U)
  {
    /* Disable I2Sext RXNE and ERR interrupt */
    __HAL_I2SEXT_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
 
    if (hi2s->TxXferCount == 0U)
    {
      hi2s->State = HAL_I2S_STATE_READY;
      /* Call user TxRx complete callback */
#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
      hi2s->TxRxCpltCallback(hi2s);
#else
      HAL_I2SEx_TxRxCpltCallback(hi2s);
#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
    }
  }
}
 
static HAL_StatusTypeDef I2SEx_FullDuplexWaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s,
                                                                   uint32_t Flag,
                                                                   uint32_t State,
                                                                   uint32_t Timeout,
                                                                   I2S_UseTypeDef i2sUsed)
{
  uint32_t tickstart = HAL_GetTick();
 
  if (i2sUsed == I2S_USE_I2S)
  {
    /* Wait until flag is reset */
    while (((__HAL_I2S_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State)
    {
      if (Timeout != HAL_MAX_DELAY)
      {
        if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
        {
          /* Set the I2S State ready */
          hi2s->State = HAL_I2S_STATE_READY;
 
          /* Process Unlocked */
          __HAL_UNLOCK(hi2s);
 
          return HAL_TIMEOUT;
        }
      }
    }
  }
  else /* i2sUsed == I2S_USE_I2SEXT */
  {
    /* Wait until flag is reset */
    while (((__HAL_I2SEXT_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State)
    {
      if (Timeout != HAL_MAX_DELAY)
      {
        if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
        {
          /* Set the I2S State ready */
          hi2s->State = HAL_I2S_STATE_READY;
 
          /* Process Unlocked */
          __HAL_UNLOCK(hi2s);
 
          return HAL_TIMEOUT;
        }
      }
    }
  }
  return HAL_OK;
}
 
#endif /* SPI_I2S_FULLDUPLEX_SUPPORT */
 
#endif /* HAL_I2S_MODULE_ENABLED */