Falling_Trigger_Management

Collaboration diagram for Falling_Trigger_Management:

Functions
__STATIC_INLINE void	LL_EXTI_EnableFallingTrig_0_31 (uint32_t ExtiLine)
	Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31. More...
__STATIC_INLINE void	LL_EXTI_DisableFallingTrig_0_31 (uint32_t ExtiLine)
	Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31. More...
__STATIC_INLINE uint32_t	LL_EXTI_IsEnabledFallingTrig_0_31 (uint32_t ExtiLine)
	Check if falling edge trigger is enabled for Lines in range 0 to 31 @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31. More...

Detailed Description

Function Documentation

LL_EXTI_DisableFallingTrig_0_31()

__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31

(

uint32_t

ExtiLine

)

Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31.

Note

The configurable wakeup lines are edge-triggered. No glitch must be generated on these lines. If a Falling edge on a configurable interrupt line occurs during a write operation in the EXTI_FTSR register, the pending bit is not set. Rising and falling edge triggers can be set for the same interrupt line. In this case, both generate a trigger condition. @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31

Parameters

ExtiLine

This parameter can be a combination of the following values: LL_EXTI_LINE_0 LL_EXTI_LINE_1 LL_EXTI_LINE_2 LL_EXTI_LINE_3 LL_EXTI_LINE_4 LL_EXTI_LINE_5 LL_EXTI_LINE_6 LL_EXTI_LINE_7 LL_EXTI_LINE_8 LL_EXTI_LINE_9 LL_EXTI_LINE_10 LL_EXTI_LINE_11 LL_EXTI_LINE_12 LL_EXTI_LINE_13 LL_EXTI_LINE_14 LL_EXTI_LINE_15 LL_EXTI_LINE_16 LL_EXTI_LINE_18 LL_EXTI_LINE_19(*) LL_EXTI_LINE_20(*) LL_EXTI_LINE_21 LL_EXTI_LINE_22

Note

(*): Available in some devices

Please check each device line mapping for EXTI Line availability

Return values

None

Definition at line 703 of file stm32f4xx_ll_exti.h.

LL_EXTI_EnableFallingTrig_0_31()

__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31

(

uint32_t

ExtiLine

)

Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31.

Note

The configurable wakeup lines are edge-triggered. No glitch must be generated on these lines. If a falling edge on a configurable interrupt line occurs during a write operation in the EXTI_FTSR register, the pending bit is not set. Rising and falling edge triggers can be set for the same interrupt line. In this case, both generate a trigger condition. @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31

Parameters

ExtiLine

This parameter can be a combination of the following values: LL_EXTI_LINE_0 LL_EXTI_LINE_1 LL_EXTI_LINE_2 LL_EXTI_LINE_3 LL_EXTI_LINE_4 LL_EXTI_LINE_5 LL_EXTI_LINE_6 LL_EXTI_LINE_7 LL_EXTI_LINE_8 LL_EXTI_LINE_9 LL_EXTI_LINE_10 LL_EXTI_LINE_11 LL_EXTI_LINE_12 LL_EXTI_LINE_13 LL_EXTI_LINE_14 LL_EXTI_LINE_15 LL_EXTI_LINE_16 LL_EXTI_LINE_18 LL_EXTI_LINE_19(*) LL_EXTI_LINE_20(*) LL_EXTI_LINE_21 LL_EXTI_LINE_22

Note

(*): Available in some devices

Please check each device line mapping for EXTI Line availability

Return values

None

Definition at line 661 of file stm32f4xx_ll_exti.h.

LL_EXTI_IsEnabledFallingTrig_0_31()

__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31

(

uint32_t

ExtiLine

)

Check if falling edge trigger is enabled for Lines in range 0 to 31 @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31.

Parameters

ExtiLine

This parameter can be a combination of the following values: LL_EXTI_LINE_0 LL_EXTI_LINE_1 LL_EXTI_LINE_2 LL_EXTI_LINE_3 LL_EXTI_LINE_4 LL_EXTI_LINE_5 LL_EXTI_LINE_6 LL_EXTI_LINE_7 LL_EXTI_LINE_8 LL_EXTI_LINE_9 LL_EXTI_LINE_10 LL_EXTI_LINE_11 LL_EXTI_LINE_12 LL_EXTI_LINE_13 LL_EXTI_LINE_14 LL_EXTI_LINE_15 LL_EXTI_LINE_16 LL_EXTI_LINE_18 LL_EXTI_LINE_19(*) LL_EXTI_LINE_20(*) LL_EXTI_LINE_21 LL_EXTI_LINE_22

Note

(*): Available in some devices

Please check each device line mapping for EXTI Line availability

Return values

State

of bit (1 or 0).

Definition at line 739 of file stm32f4xx_ll_exti.h.